Left 買い物を続ける

カートに商品はありません

HoopTalent Hooping Fixtures for TITAN


$13500 USD $20600 USD

送料はチェックアウトページで計算されます。

: M0505 Fixture

FAQ
注文してからどれくらいで届きますか?

ご注文は通常1~3営業日(月~金)以内に処理され、発送には通常7~20営業日かかります。

どの配送方法を利用しますか?

FedEx、UPSのような大手運送会社、および発送の早い地元の宅配便パートナーを利用して荷物を発送しています。

どのように注文を追跡できますか?

ご注文が完了し、商品が発送されると、発送確認メールが届きます。配送業者の公式ウェブサイトで商品を追跡することができます。または、弊社まで直接お問い合わせください。

配送料、税金、関税について

送料はレジにて計算されます。

DDU(関税別)での発送となりますので、表示されている商品価格には税金・関税は含まれておりません。

ご注文の商品が配送先に到着した時点で、お客様は配送先の地域の輸入関税、通関税、地方消費税をすべて支払う必要があります。関税の見積もりについては、最寄りの税関にお問い合わせください。

返品するにはどうすればよいですか?
MaggieFrame では、商品到着後14日以内であれば、すべての商品の返品を受け付けております。申し訳ございませんが、送料および手数料の返金はいたしかねます。残念ながら、例外なく、MaggieFrame では、使用済みまたは破損した商品の返品は受け付けておりません。詳しくは、返品規定をご覧ください。

クーポンコードはどのように使用するのですか?
クーポンコードをお持ちの場合は、グラム製品をすべてショッピングカートに入れ、チェックアウトの手続きを開始してください。コードを入力する欄がありますので、「適用」をクリックしてください。Sew Techでは、1回のご注文で1つのプロモーションコードしか入力できませんのでご注意ください。すでにご注文済みの商品には、クーポンコードは使用できません。

住所が配送国以外の場合はどうすればよいですか?
お客様の住所が配送国リストにない場合は、ご購入前にお問い合わせください。
1. These fixtures must be used with embroidery Hooping Station Kit and 5.1"x5.1" or 6.9"x6.9" MaggieFrame magnetic embroidery hoops.
2. The fixtures will help hold and align the TITAN embroidery hoops during the hooping process, and the fixtures have magnetic backing flaps that hold your stabilizer backing in place.

Product Dimension:

1. M0505 Fixture x 1 (450x330x110mm/ 17.8x13x4.3")
2. M7272 Fixture x 1 (505x330x110mm/ 20x13x4.3")

Get User Manual and more videos on how to use HoopTalent Hooping Station. 👉 Click Here 

Product Videos:

These videos will help you to better understand our products and usage.

Chapter 11: 5.1x5.1in MaggieFrame Hoop the Jacket Chest on the Main Station

Watch video

Chapter 7: 6x8in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 12: 6x8in MaggieFrame Hoop the Shopping Bag on the Sleeve Station

Watch video

Chapter 6: 7.7x12.5in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 3: 7.6x2.7in MaggieFrame Hoop Hoodie Sleeve on Sleeve Station

Watch video

We have a lot of different size hoops to compatible with TITAN Embroidery Machines. Click Here to check all products for TITAN embroidery machines.

For more product options, browse our full Embroidery Hoops and Other Products collection .

FAQs

What are HoopTalent Hooping Fixtures used for with TITAN embroidery machines?

HoopTalent Hooping Fixtures are designed to hold and align MaggieFrame magnetic hoops during the hooping process on TITAN embroidery machines. They stabilize the fabric and backing using magnetic flaps, ensuring precise alignment for embroidery on garments like jackets, hoodies, and tote bags. This improves consistency and saves hooping time across multiple production runs.

Which hoop sizes are compatible with HoopTalent Fixtures?

The HoopTalent Fixtures work with MaggieFrame magnetic hoops in 5.1″×5.1″(130×130 mm) and 6.9″×6.9″(175×175 mm) sizes. They must be used together with the HoopTalent Hooping Station Kit for optimal fit. This ensures smooth workflow and accurate tension control when hooping materials of varying thicknesses on TITAN embroidery machines.

How should I install the HoopTalent Fixtures on the Hooping Station?

Installation is simple: attach the selected fixture (M0505 or M7272) onto your HoopTalent Hooping Station base, align the TITAN hoop to match positioning marks, and use magnetic flaps to secure the stabilizer. Ensure both panels are flush to prevent slipping. Once adjusted, the setup holds consistent alignment through repeated embroidery operations.

Can these fixtures be used on different fabric types?

Yes, HoopTalent Fixtures for TITAN embroidery machines perform well on cotton, polyester, canvas, and blended textiles. The magnetic holder provides even pressure, avoiding hoop marks while keeping stabilizer tight. Whether hooping a hoodie sleeve or a tote bag, these fixtures maintain fabric stability for sharp, detailed embroidery results.

Description
1. These fixtures must be used with embroidery Hooping Station Kit and 5.1"x5.1" or 6.9"x6.9" MaggieFrame magnetic embroidery hoops.
2. The fixtures will help hold and align the TITAN embroidery hoops during the hooping process, and the fixtures have magnetic backing flaps that hold your stabilizer backing in place.

Product Dimension:

1. M0505 Fixture x 1 (450x330x110mm/ 17.8x13x4.3")
2. M7272 Fixture x 1 (505x330x110mm/ 20x13x4.3")

Get User Manual and more videos on how to use HoopTalent Hooping Station. 👉 Click Here 

Product Videos:

These videos will help you to better understand our products and usage.

Chapter 11: 5.1x5.1in MaggieFrame Hoop the Jacket Chest on the Main Station

Watch video

Chapter 7: 6x8in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 12: 6x8in MaggieFrame Hoop the Shopping Bag on the Sleeve Station

Watch video

Chapter 6: 7.7x12.5in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 3: 7.6x2.7in MaggieFrame Hoop Hoodie Sleeve on Sleeve Station

Watch video

We have a lot of different size hoops to compatible with TITAN Embroidery Machines. Click Here to check all products for TITAN embroidery machines.

For more product options, browse our full Embroidery Hoops and Other Products collection .

FAQs

What are HoopTalent Hooping Fixtures used for with TITAN embroidery machines?

HoopTalent Hooping Fixtures are designed to hold and align MaggieFrame magnetic hoops during the hooping process on TITAN embroidery machines. They stabilize the fabric and backing using magnetic flaps, ensuring precise alignment for embroidery on garments like jackets, hoodies, and tote bags. This improves consistency and saves hooping time across multiple production runs.

Which hoop sizes are compatible with HoopTalent Fixtures?

The HoopTalent Fixtures work with MaggieFrame magnetic hoops in 5.1″×5.1″(130×130 mm) and 6.9″×6.9″(175×175 mm) sizes. They must be used together with the HoopTalent Hooping Station Kit for optimal fit. This ensures smooth workflow and accurate tension control when hooping materials of varying thicknesses on TITAN embroidery machines.

How should I install the HoopTalent Fixtures on the Hooping Station?

Installation is simple: attach the selected fixture (M0505 or M7272) onto your HoopTalent Hooping Station base, align the TITAN hoop to match positioning marks, and use magnetic flaps to secure the stabilizer. Ensure both panels are flush to prevent slipping. Once adjusted, the setup holds consistent alignment through repeated embroidery operations.

Can these fixtures be used on different fabric types?

Yes, HoopTalent Fixtures for TITAN embroidery machines perform well on cotton, polyester, canvas, and blended textiles. The magnetic holder provides even pressure, avoiding hoop marks while keeping stabilizer tight. Whether hooping a hoodie sleeve or a tote bag, these fixtures maintain fabric stability for sharp, detailed embroidery results.