1. These fixtures must be used with embroidery Hooping Station Kit and 5.1"x5.1" or 6.9"x6.9" MaggieFrame magnetic embroidery hoops.
2. The fixtures will help hold and align the HSW embroidery hoops during the hooping process, and the fixtures have magnetic backing flaps that hold your stabilizer backing in place.
Product Dimension:
1. M0505 Fixture x 1 (450x330x110mm/ 17.8x13x4.3")
2. M7272 Fixture x 1 (505x330x110mm/ 20x13x4.3")
Get User Manual and more videos on how to use HoopTalent Hooping Station. 👉 Click Here
Product Videos:
These videos will help you to better understand our products and usage.
Chapter 11: 5.1x5.1in MaggieFrame Hoop the Jacket Chest on the Main Station
Watch video
Chapter 7: 6x8in MaggieFrame Hoop Hoodie Back on Main Station
Watch video
Chapter 12: 6x8in MaggieFrame Hoop the Shopping Bag on the Sleeve Station
Watch video
Chapter 6: 7.7x12.5in MaggieFrame Hoop Hoodie Back on Main Station
Watch video
Chapter 3: 7.6x2.7in MaggieFrame Hoop Hoodie Sleeve on Sleeve Station
Watch video
We have a lot of different size hoops to compatible with HSW Embroidery Machines. Click Here to check all products for HSW embroidery machines.
For more product options, browse our full
Embroidery Hoops and Other Products collection
.
FAQs
What are HoopTalent Hooping Fixtures for HSW used for?
They are designed to assist users of HSW embroidery machines in securely positioning fabric and stabilizer when working with 5.1″×5.1″ (130×130 mm) and 6.9″×6.9″ (175×175 mm) hoops. Used with the Hooping Station Kit, these fixtures help maintain even tension and alignment for embroidery on garments, hoodies, or bags.
Are these fixtures compatible with all embroidery hoops?
No, they are specifically made for 5.1″×5.1″ (130×130 mm) and 6.9″×6.9″ (175×175 mm) magnetic embroidery hoops. Using other sizes or non-magnetic hoops may affect the alignment and performance. For best results, pair them with the recommended HoopTalent Hooping Station and corresponding hoop models.
How do I install the HoopTalent Hooping Fixtures on the station?
Installation is simple—position the fixture on the station surface, align the magnets, and let them snap in place. The magnetic backing flaps will hold the stabilizer backing firmly. Make sure the HSW embroidery hoop seats evenly before hooping the garment to maintain smooth embroidery results and avoid hoop slippage.
How should I clean and maintain the HoopTalent Hooping Fixtures?
Keep the fixture surfaces clean by wiping with a soft, dry cloth after every use to remove dust or thread residues. Avoid using strong chemicals or soaking in water to prevent corrosion. Regular maintenance will ensure consistent performance and precise alignment with your HSW embroidery machine setup.