Left 買い物を続ける

カートに商品はありません

HoopTalent Hooping Fixtures for Disen


$13500 USD $20600 USD

送料はチェックアウトページで計算されます。

: M0505 Fixture

FAQ
注文してからどれくらいで届きますか?

ご注文は通常1~3営業日(月~金)以内に処理され、発送には通常7~20営業日かかります。

どの配送方法を利用しますか?

FedEx、UPSのような大手運送会社、および発送の早い地元の宅配便パートナーを利用して荷物を発送しています。

どのように注文を追跡できますか?

ご注文が完了し、商品が発送されると、発送確認メールが届きます。配送業者の公式ウェブサイトで商品を追跡することができます。または、弊社まで直接お問い合わせください。

配送料、税金、関税について

送料はレジにて計算されます。

DDU(関税別)での発送となりますので、表示されている商品価格には税金・関税は含まれておりません。

ご注文の商品が配送先に到着した時点で、お客様は配送先の地域の輸入関税、通関税、地方消費税をすべて支払う必要があります。関税の見積もりについては、最寄りの税関にお問い合わせください。

返品するにはどうすればよいですか?
MaggieFrame では、商品到着後14日以内であれば、すべての商品の返品を受け付けております。申し訳ございませんが、送料および手数料の返金はいたしかねます。残念ながら、例外なく、MaggieFrame では、使用済みまたは破損した商品の返品は受け付けておりません。詳しくは、返品規定をご覧ください。

クーポンコードはどのように使用するのですか?
クーポンコードをお持ちの場合は、グラム製品をすべてショッピングカートに入れ、チェックアウトの手続きを開始してください。コードを入力する欄がありますので、「適用」をクリックしてください。Sew Techでは、1回のご注文で1つのプロモーションコードしか入力できませんのでご注意ください。すでにご注文済みの商品には、クーポンコードは使用できません。

住所が配送国以外の場合はどうすればよいですか?
お客様の住所が配送国リストにない場合は、ご購入前にお問い合わせください。
1. These fixtures must be used with embroidery Hooping Station Kit and 5.1"x5.1" or 6.9"x6.9" MaggieFrame magnetic embroidery hoops.
2. The fixtures will help hold and align the Disen embroidery hoops during the hooping process, and the fixtures have magnetic backing flaps that hold your stabilizer backing in place.

Product Dimension:

1. M0505 Fixture x 1 (450x330x110mm/ 17.8x13x4.3")
2. M7272 Fixture x 1 (505x330x110mm/ 20x13x4.3")

Get User Manual and more videos on how to use HoopTalent Hooping Station. 👉 Click Here 

Product Videos:

These videos will help you to better understand our products and usage.

Chapter 11: 5.1x5.1in MaggieFrame Hoop the Jacket Chest on the Main Station

Watch video

Chapter 7: 6x8in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 12: 6x8in MaggieFrame Hoop the Shopping Bag on the Sleeve Station

Watch video

Chapter 6: 7.7x12.5in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 3: 7.6x2.7in MaggieFrame Hoop Hoodie Sleeve on Sleeve Station

Watch video

We have a lot of different size hoops to compatible with Disen Embroidery Machines. Click Here to check all products for Disen embroidery machines.

For more product options, browse our full Embroidery Hoops and Other Products collection .

FAQs

How do I use the HoopTalent Hooping Fixtures for my Disen embroidery machine?

To use the HoopTalent hooping fixtures, attach them to your Hooping Station Kit and position your 5.1″ × 5.1″(130 × 130 mm)or 6.9″ × 6.9″(175 × 175 mm)MaggieFrame magnetic hoops in place. The fixture’s magnetic flaps secure the stabilizer and fabric, ensuring accurate hoop alignment and consistent hooping across projects for Disen embroidery machines.

Are the HoopTalent Fixtures compatible with other embroidery hoop sizes?

The fixtures are optimized for MaggieFrame hoops sized 5.1″ × 5.1″(130 × 130 mm)and 6.9″ × 6.9″(175 × 175 mm). For best results, use within these specifications on your Hooping Station. Other hoop sizes may not fit securely or offer proper alignment, reducing hooping precision and stability during embroidery.

Can I use the HoopTalent Hooping Fixtures on different fabric types?

Yes, the HoopTalent fixtures work well with both light and heavy fabrics, including cotton, fleece, and canvas. The magnetic backing flaps ensure steady grip while hooping delicate or thick materials. For best performance, pair the fixtures with the correct stabilizer to avoid shifting or puckering on your Disen embroidery machine projects.

How should I maintain and store my HoopTalent Hooping Fixtures?

Keep the HoopTalent fixtures clean by wiping off dust, thread, and residue after each embroidery session. Store them flat in a dry area to prevent magnet fatigue. Avoid dropping or exposing them to strong impacts to maintain alignment accuracy and extend the service life of your embroidery hooping station setup.

Description
1. These fixtures must be used with embroidery Hooping Station Kit and 5.1"x5.1" or 6.9"x6.9" MaggieFrame magnetic embroidery hoops.
2. The fixtures will help hold and align the Disen embroidery hoops during the hooping process, and the fixtures have magnetic backing flaps that hold your stabilizer backing in place.

Product Dimension:

1. M0505 Fixture x 1 (450x330x110mm/ 17.8x13x4.3")
2. M7272 Fixture x 1 (505x330x110mm/ 20x13x4.3")

Get User Manual and more videos on how to use HoopTalent Hooping Station. 👉 Click Here 

Product Videos:

These videos will help you to better understand our products and usage.

Chapter 11: 5.1x5.1in MaggieFrame Hoop the Jacket Chest on the Main Station

Watch video

Chapter 7: 6x8in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 12: 6x8in MaggieFrame Hoop the Shopping Bag on the Sleeve Station

Watch video

Chapter 6: 7.7x12.5in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 3: 7.6x2.7in MaggieFrame Hoop Hoodie Sleeve on Sleeve Station

Watch video

We have a lot of different size hoops to compatible with Disen Embroidery Machines. Click Here to check all products for Disen embroidery machines.

For more product options, browse our full Embroidery Hoops and Other Products collection .

FAQs

How do I use the HoopTalent Hooping Fixtures for my Disen embroidery machine?

To use the HoopTalent hooping fixtures, attach them to your Hooping Station Kit and position your 5.1″ × 5.1″(130 × 130 mm)or 6.9″ × 6.9″(175 × 175 mm)MaggieFrame magnetic hoops in place. The fixture’s magnetic flaps secure the stabilizer and fabric, ensuring accurate hoop alignment and consistent hooping across projects for Disen embroidery machines.

Are the HoopTalent Fixtures compatible with other embroidery hoop sizes?

The fixtures are optimized for MaggieFrame hoops sized 5.1″ × 5.1″(130 × 130 mm)and 6.9″ × 6.9″(175 × 175 mm). For best results, use within these specifications on your Hooping Station. Other hoop sizes may not fit securely or offer proper alignment, reducing hooping precision and stability during embroidery.

Can I use the HoopTalent Hooping Fixtures on different fabric types?

Yes, the HoopTalent fixtures work well with both light and heavy fabrics, including cotton, fleece, and canvas. The magnetic backing flaps ensure steady grip while hooping delicate or thick materials. For best performance, pair the fixtures with the correct stabilizer to avoid shifting or puckering on your Disen embroidery machine projects.

How should I maintain and store my HoopTalent Hooping Fixtures?

Keep the HoopTalent fixtures clean by wiping off dust, thread, and residue after each embroidery session. Store them flat in a dry area to prevent magnet fatigue. Avoid dropping or exposing them to strong impacts to maintain alignment accuracy and extend the service life of your embroidery hooping station setup.