Left 買い物を続ける
ご注文

カートに商品はありません

HoopTalent Hooping Fixtures for COS


$17880 USD $20600 USD

送料はチェックアウトページで計算されます。

: M0505 Fixture

FAQ
注文してからどれくらいで届きますか?

ご注文は通常1~3営業日(月~金)以内に処理され、発送には通常7~20営業日かかります。

どの配送方法を利用しますか?

FedEx、UPSのような大手運送会社、および発送の早い地元の宅配便パートナーを利用して荷物を発送しています。

どのように注文を追跡できますか?

ご注文が完了し、商品が発送されると、発送確認メールが届きます。配送業者の公式ウェブサイトで商品を追跡することができます。または、弊社まで直接お問い合わせください。

配送料、税金、関税について

送料はレジにて計算されます。

DDU(関税別)での発送となりますので、表示されている商品価格には税金・関税は含まれておりません。

ご注文の商品が配送先に到着した時点で、お客様は配送先の地域の輸入関税、通関税、地方消費税をすべて支払う必要があります。関税の見積もりについては、最寄りの税関にお問い合わせください。

返品するにはどうすればよいですか?
MaggieFrame では、商品到着後14日以内であれば、すべての商品の返品を受け付けております。申し訳ございませんが、送料および手数料の返金はいたしかねます。残念ながら、例外なく、MaggieFrame では、使用済みまたは破損した商品の返品は受け付けておりません。詳しくは、返品規定をご覧ください。

クーポンコードはどのように使用するのですか?
クーポンコードをお持ちの場合は、グラム製品をすべてショッピングカートに入れ、チェックアウトの手続きを開始してください。コードを入力する欄がありますので、「適用」をクリックしてください。Sew Techでは、1回のご注文で1つのプロモーションコードしか入力できませんのでご注意ください。すでにご注文済みの商品には、クーポンコードは使用できません。

住所が配送国以外の場合はどうすればよいですか?
お客様の住所が配送国リストにない場合は、ご購入前にお問い合わせください。
1. These fixtures must be used with embroidery Hooping Station Kit and 5.1"x5.1" or 6.9"x6.9" MaggieFrame magnetic embroidery hoops.
2. The fixtures will help hold and align the COS embroidery hoops during the hooping process, and the fixtures have magnetic backing flaps that hold your stabilizer backing in place.

Product Dimension:

1. M0505 Fixture x 1 (450x330x110mm/ 17.8x13x4.3")
2. M7272 Fixture x 1 (505x330x110mm/ 20x13x4.3")

Get User Manual and more videos on how to use HoopTalent Hooping Station. 👉 Click Here 

Product Videos:

These videos will help you to better understand our products and usage.

Chapter 11: 5.1x5.1in MaggieFrame Hoop the Jacket Chest on the Main Station

Watch video

Chapter 7: 6x8in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 12: 6x8in MaggieFrame Hoop the Shopping Bag on the Sleeve Station

Watch video

Chapter 6: 7.7x12.5in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 3: 7.6x2.7in MaggieFrame Hoop Hoodie Sleeve on Sleeve Station

Watch video

We have a lot of different size hoops to compatible with COS Embroidery Machines. Click Here to check all products for COS embroidery machines.

For more product options, browse our full Embroidery Hoops and Other Products collection .

FAQs

Are HoopTalent Hooping Fixtures for COS compatible with other embroidery hoop sizes?

The HoopTalent fixtures for COS are designed for use with HoopTalent Hooping Station Kits and compatible 5.1″×5.1″ (130×130 mm) or 6.9″×6.9″ (175×175 mm) MaggieFrame magnetic hoops. Using other hoop sizes is not recommended as alignment accuracy and stability may be affected. Always check compatibility before use to ensure consistent embroidery results.

How do I install the HoopTalent Hooping Fixtures on my Hooping Station?

Installation is simple: align the fixture with your HoopTalent Hooping Station base, ensuring the magnetic flaps face upward. The fixture securely snaps into place using built-in alignment guides. Once attached, you can position your stabilizer and fabric without shifting. This system simplifies setup for COS embroidery machines and keeps hooping uniform and efficient.

What materials can be used with these Hooping Fixtures?

HoopTalent Hooping Fixtures for COS work well with common embroidery fabrics such as cotton, polyester blends, fleece, and lightweight canvas. When pairing with MaggieFrame magnetic hoops, the magnetic backing flaps hold the stabilizer firmly even with thicker fabrics. Always ensure the fabric is flat and stabilized properly to prevent puckering during stitching.

How should I maintain and clean my HoopTalent Hooping Fixtures?

To prolong fixture lifespan, periodically wipe all surfaces with a soft, lint-free cloth to remove adhesive residue or dust. Avoid harsh solvents that might damage the magnetic components. Keep the magnets clear of metal debris to maintain holding strength. Proper care ensures smooth hooping action for COS embroidery stations and consistent hoop alignment accuracy.