Left 買い物を続ける

カートに商品はありません

HoopTalent Hooping Fixtures for Auzen


$13500 USD $20600 USD

送料はチェックアウトページで計算されます。

: M0505 Fixture

FAQ
注文してからどれくらいで届きますか?

ご注文は通常1~3営業日(月~金)以内に処理され、発送には通常7~20営業日かかります。

どの配送方法を利用しますか?

FedEx、UPSのような大手運送会社、および発送の早い地元の宅配便パートナーを利用して荷物を発送しています。

どのように注文を追跡できますか?

ご注文が完了し、商品が発送されると、発送確認メールが届きます。配送業者の公式ウェブサイトで商品を追跡することができます。または、弊社まで直接お問い合わせください。

配送料、税金、関税について

送料はレジにて計算されます。

DDU(関税別)での発送となりますので、表示されている商品価格には税金・関税は含まれておりません。

ご注文の商品が配送先に到着した時点で、お客様は配送先の地域の輸入関税、通関税、地方消費税をすべて支払う必要があります。関税の見積もりについては、最寄りの税関にお問い合わせください。

返品するにはどうすればよいですか?
MaggieFrame では、商品到着後14日以内であれば、すべての商品の返品を受け付けております。申し訳ございませんが、送料および手数料の返金はいたしかねます。残念ながら、例外なく、MaggieFrame では、使用済みまたは破損した商品の返品は受け付けておりません。詳しくは、返品規定をご覧ください。

クーポンコードはどのように使用するのですか?
クーポンコードをお持ちの場合は、グラム製品をすべてショッピングカートに入れ、チェックアウトの手続きを開始してください。コードを入力する欄がありますので、「適用」をクリックしてください。Sew Techでは、1回のご注文で1つのプロモーションコードしか入力できませんのでご注意ください。すでにご注文済みの商品には、クーポンコードは使用できません。

住所が配送国以外の場合はどうすればよいですか?
お客様の住所が配送国リストにない場合は、ご購入前にお問い合わせください。
1. These fixtures must be used with embroidery Hooping Station Kit and 5.1"x5.1" or 6.9"x6.9" MaggieFrame magnetic embroidery hoops.
2. The fixtures will help hold and align the Auzen embroidery hoops during the hooping process, and the fixtures have magnetic backing flaps that hold your stabilizer backing in place.

Product Dimension:

1. M0505 Fixture x 1 (450x330x110mm/ 17.8x13x4.3")
2. M7272 Fixture x 1 (505x330x110mm/ 20x13x4.3")

Get User Manual and more videos on how to use HoopTalent Hooping Station. 👉 Click Here 

Product Videos:

These videos will help you to better understand our products and usage.

Chapter 11: 5.1x5.1in MaggieFrame Hoop the Jacket Chest on the Main Station

Watch video

Chapter 7: 6x8in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 12: 6x8in MaggieFrame Hoop the Shopping Bag on the Sleeve Station

Watch video

Chapter 6: 7.7x12.5in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 3: 7.6x2.7in MaggieFrame Hoop Hoodie Sleeve on Sleeve Station

Watch video

We have a lot of different size hoops to compatible with Auzen Embroidery Machines. Click Here to check all products for Auzen embroidery machines.

For more product options, browse our full Embroidery Hoops and Other Products collection .

FAQs

Are these HoopTalent hooping fixtures compatible with all Auzen embroidery machines?

These fixtures are made for use with the Hooping Station Kit and are fully compatible with most Auzen embroidery machines that accept 5.1″ × 5.1″ (130 × 130 mm) or 6.9″ × 6.9″ (175 × 175 mm) magnetic hoops. They help improve alignment and reduce shifting when hooping garments, ensuring consistent results in multi-needle embroidery applications.

How do the magnetic backing flaps improve the hooping process?

The magnetic backing flaps on HoopTalent fixtures securely hold the stabilizer while positioning the Auzen embroidery hoop. This prevents movement or slippage during setup, making the hooping process faster and more precise. The design helps embroider thick fabrics like hoodies and jackets with accurate placement and minimal adjustment time.

What are the dimensions of the HoopTalent fixtures, and how should I choose the correct size?

The M0505 fixture measures 17.8″ × 13″ × 4.3″ (450 × 330 × 110 mm), while the M7272 version is 20″ × 13″ × 4.3″ (505 × 330 × 110 mm). The size selection depends on the embroidery field and hoop size used with your Auzen machine. Both models accommodate standard MaggieFrame magnetic hoops for varied apparel and accessory projects.

How should I maintain the HoopTalent hooping fixtures for long-term performance?

Keep the surfaces clean by wiping dust or thread residues after each use. Avoid strong cleaners; instead use a soft damp cloth. Store the fixtures on their designated docking area to preserve magnet strength. Regular care ensures stable magnetic force and long-lasting performance on your Auzen embroidery machine setup.

Description
1. These fixtures must be used with embroidery Hooping Station Kit and 5.1"x5.1" or 6.9"x6.9" MaggieFrame magnetic embroidery hoops.
2. The fixtures will help hold and align the Auzen embroidery hoops during the hooping process, and the fixtures have magnetic backing flaps that hold your stabilizer backing in place.

Product Dimension:

1. M0505 Fixture x 1 (450x330x110mm/ 17.8x13x4.3")
2. M7272 Fixture x 1 (505x330x110mm/ 20x13x4.3")

Get User Manual and more videos on how to use HoopTalent Hooping Station. 👉 Click Here 

Product Videos:

These videos will help you to better understand our products and usage.

Chapter 11: 5.1x5.1in MaggieFrame Hoop the Jacket Chest on the Main Station

Watch video

Chapter 7: 6x8in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 12: 6x8in MaggieFrame Hoop the Shopping Bag on the Sleeve Station

Watch video

Chapter 6: 7.7x12.5in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 3: 7.6x2.7in MaggieFrame Hoop Hoodie Sleeve on Sleeve Station

Watch video

We have a lot of different size hoops to compatible with Auzen Embroidery Machines. Click Here to check all products for Auzen embroidery machines.

For more product options, browse our full Embroidery Hoops and Other Products collection .

FAQs

Are these HoopTalent hooping fixtures compatible with all Auzen embroidery machines?

These fixtures are made for use with the Hooping Station Kit and are fully compatible with most Auzen embroidery machines that accept 5.1″ × 5.1″ (130 × 130 mm) or 6.9″ × 6.9″ (175 × 175 mm) magnetic hoops. They help improve alignment and reduce shifting when hooping garments, ensuring consistent results in multi-needle embroidery applications.

How do the magnetic backing flaps improve the hooping process?

The magnetic backing flaps on HoopTalent fixtures securely hold the stabilizer while positioning the Auzen embroidery hoop. This prevents movement or slippage during setup, making the hooping process faster and more precise. The design helps embroider thick fabrics like hoodies and jackets with accurate placement and minimal adjustment time.

What are the dimensions of the HoopTalent fixtures, and how should I choose the correct size?

The M0505 fixture measures 17.8″ × 13″ × 4.3″ (450 × 330 × 110 mm), while the M7272 version is 20″ × 13″ × 4.3″ (505 × 330 × 110 mm). The size selection depends on the embroidery field and hoop size used with your Auzen machine. Both models accommodate standard MaggieFrame magnetic hoops for varied apparel and accessory projects.

How should I maintain the HoopTalent hooping fixtures for long-term performance?

Keep the surfaces clean by wiping dust or thread residues after each use. Avoid strong cleaners; instead use a soft damp cloth. Store the fixtures on their designated docking area to preserve magnet strength. Regular care ensures stable magnetic force and long-lasting performance on your Auzen embroidery machine setup.