Left Продолжить покупки

У вас нет товаров в корзине

HoopTalent Hooping Fixtures for HIGHLAND


$13500 USD $20600 USD

Стоимость доставки будет рассчитана на странице оформления заказа.

: M0505 Fixture

FAQ
Сколько времени требуется для получения моего заказа?

Заказы обычно обрабатываются в течение 1-3 рабочих дней (понедельник-пятница), а время доставки обычно составляет 7-20 рабочих дней.

Какой способ доставки мы используем?

Для доставки посылок мы используем таких крупных перевозчиков, как FedEx, UPS, а также некоторых местных курьеров, осуществляющих быструю доставку.

Как я могу отследить свой заказ?

После успешного оформления заказа и отправки товара вы получите письмо с подтверждением отправки. Отслеживать отправление можно на официальном сайте перевозчика. Или вы можете связаться с нами напрямую для получения информации о доставке.

Стоимость доставки, налоги и сборы

Стоимость доставки будет рассчитана на странице оформления заказа.

Мы осуществляем доставку во все регионы на условиях DDU (Delivery Duty Unpaid), что означает, что указанные цены на товары не включают в себя все налоги и сборы.

После того как ваш заказ будет доставлен в пункт назначения, вам придется оплатить все импортные, таможенные и местные налоги с продаж, действующие в месте доставки. Для получения информации о размере налогов и пошлин на вашу покупку обратитесь в местную таможню.

Как вернуть товар?
MaggieFrame с радостью принимает возврат всех товаров в течение 14 дней с момента получения. К сожалению, стоимость доставки и обработки при возврате не возмещается. К сожалению, MaggieFrame не может принять к возврату все без исключения товары, бывшие в употреблении или поврежденные. Для получения дополнительной информации, пожалуйста, ознакомьтесь с нашей политикой возврата.

Как использовать код купона?
Если у вас есть код купона, добавьте все товары Glam в корзину и начните процесс оформления заказа. Появится поле для ввода кода, затем просто нажмите кнопку "Применить". Обратите внимание, что для одного заказа в Sew Tech можно ввести только один промокод. Коды купонов не могут быть использованы для уже оформленных заказов.

Что делать, если ваш адрес находится за пределами страны доставки?
Если ваша страна отсутствует в списке стран доставки при оформлении заказа, пожалуйста, свяжитесь с нами перед покупкой.
1. These fixtures must be used with embroidery Hooping Station Kit and 5.1"x5.1" or 6.9"x6.9" MaggieFrame magnetic embroidery hoops.
2. The fixtures will help hold and align the Highland embroidery hoops during the hooping process, and the fixtures have magnetic backing flaps that hold your stabilizer backing in place.

Product Dimension:

1. M0505 Fixture x 1 (450x330x110mm/ 17.8x13x4.3")
2. M7272 Fixture x 1 (505x330x110mm/ 20x13x4.3")

Get User Manual and more videos on how to use HoopTalent Hooping Station. 👉 Click Here 

Product Videos:

These videos will help you to better understand our products and usage.

Chapter 11: 5.1x5.1in MaggieFrame Hoop the Jacket Chest on the Main Station

Watch video

Chapter 7: 6x8in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 12: 6x8in MaggieFrame Hoop the Shopping Bag on the Sleeve Station

Watch video

Chapter 6: 7.7x12.5in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 3: 7.6x2.7in MaggieFrame Hoop Hoodie Sleeve on Sleeve Station

Watch video

We have a lot of different size hoops to compatible with Highland Embroidery Machines. Click Here to check all products for Highland embroidery machines.

For more product options, browse our full Embroidery Hoops and Other Products collection .

FAQs

Are these HoopTalent fixtures compatible with all Highland embroidery machines?

These HoopTalent hooping fixtures are designed for use with Highland embroidery machines when paired with a compatible Hooping Station Kit and MaggieFrame magnetic embroidery hoops, such as the 5.1″×5.1″(130×130 mm) and 6.9″×6.9″(175×175 mm) models. They ensure precise fabric positioning during multi-layer hooping processes.

How do the magnetic backing flaps on the fixtures improve embroidery efficiency?

The built-in magnetic backing flaps in HoopTalent fixtures hold stabilizer sheets securely in place, preventing slippage and misalignment during the hooping stage. This allows for consistent embroidery tension across Highland machines, making repeated placement of fabrics faster and more efficient for production runs.

Can I use different frame sizes with these HoopTalent hooping fixtures?

Yes. While optimized for 5.1″×5.1″(130×130 mm) and 6.9″×6.9″(175×175 mm) MaggieFrame magnetic hoops, the HoopTalent fixtures can also support similar-sized frames when used on a compatible Hooping Station. Always align the hoop guided by the fixture’s corner alignment markers to maintain accurate embroidery placement.

What is the recommended way to clean and maintain the HoopTalent fixtures?

To keep your HoopTalent fixtures operating smoothly on Highland embroidery machines, wipe magnetic surfaces with a soft, non-abrasive cloth after each session. Avoid using solvents that may weaken magnet strength. Store fixtures flat and dry to preserve accurate alignment and long-term reliability of your hooping setup.

Description
1. These fixtures must be used with embroidery Hooping Station Kit and 5.1"x5.1" or 6.9"x6.9" MaggieFrame magnetic embroidery hoops.
2. The fixtures will help hold and align the Highland embroidery hoops during the hooping process, and the fixtures have magnetic backing flaps that hold your stabilizer backing in place.

Product Dimension:

1. M0505 Fixture x 1 (450x330x110mm/ 17.8x13x4.3")
2. M7272 Fixture x 1 (505x330x110mm/ 20x13x4.3")

Get User Manual and more videos on how to use HoopTalent Hooping Station. 👉 Click Here 

Product Videos:

These videos will help you to better understand our products and usage.

Chapter 11: 5.1x5.1in MaggieFrame Hoop the Jacket Chest on the Main Station

Watch video

Chapter 7: 6x8in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 12: 6x8in MaggieFrame Hoop the Shopping Bag on the Sleeve Station

Watch video

Chapter 6: 7.7x12.5in MaggieFrame Hoop Hoodie Back on Main Station

Watch video

Chapter 3: 7.6x2.7in MaggieFrame Hoop Hoodie Sleeve on Sleeve Station

Watch video

We have a lot of different size hoops to compatible with Highland Embroidery Machines. Click Here to check all products for Highland embroidery machines.

For more product options, browse our full Embroidery Hoops and Other Products collection .

FAQs

Are these HoopTalent fixtures compatible with all Highland embroidery machines?

These HoopTalent hooping fixtures are designed for use with Highland embroidery machines when paired with a compatible Hooping Station Kit and MaggieFrame magnetic embroidery hoops, such as the 5.1″×5.1″(130×130 mm) and 6.9″×6.9″(175×175 mm) models. They ensure precise fabric positioning during multi-layer hooping processes.

How do the magnetic backing flaps on the fixtures improve embroidery efficiency?

The built-in magnetic backing flaps in HoopTalent fixtures hold stabilizer sheets securely in place, preventing slippage and misalignment during the hooping stage. This allows for consistent embroidery tension across Highland machines, making repeated placement of fabrics faster and more efficient for production runs.

Can I use different frame sizes with these HoopTalent hooping fixtures?

Yes. While optimized for 5.1″×5.1″(130×130 mm) and 6.9″×6.9″(175×175 mm) MaggieFrame magnetic hoops, the HoopTalent fixtures can also support similar-sized frames when used on a compatible Hooping Station. Always align the hoop guided by the fixture’s corner alignment markers to maintain accurate embroidery placement.

What is the recommended way to clean and maintain the HoopTalent fixtures?

To keep your HoopTalent fixtures operating smoothly on Highland embroidery machines, wipe magnetic surfaces with a soft, non-abrasive cloth after each session. Avoid using solvents that may weaken magnet strength. Store fixtures flat and dry to preserve accurate alignment and long-term reliability of your hooping setup.