Left Continuar la compra
Pedido

Su carrito actualmente está vacío.

3 Different Ways To Embroider a Sweatshirt : using Fast Frames, MaggieFrame and embroidery hoops

3 Different Ways To Embroider a Sweatshirt : using Fast Frames, MaggieFrame and embroidery hoops

   Outline

  1. Traditional Embroidery Hoop with a Single Needle Machine

  2. Fast Magna Frames on a Brother Six Needle Machine

  3. MaggieFrames on a Melco Embroidery Machine

  4. Conclusion

  5. Additional Notes

         1. Traditional Embroidery Hoop with a Single Needle Machine:

    • Machine Used:

      Single needle embroidery machine.
    • Hoop Used:

      Traditional embroidery hoop.
    • Process:

      • Start by using the traditional embroidery hoop on the single needle machine.
      • For this method, I'll be using a Gildan 18 000 sweatshirt, which I usually purchase from Jiffy shirts or SNF activewear.
      • To find the center of your design, fold the sweatshirt in half and mark it with a mini iron or a Cricut Mini press.
      • For perfect placement, especially for left chest monograms or logos, I recommend using the designs and machine embroidery Target stickers. These stickers have arrows to show the direction of the design.
      • Once you've marked your placement, it's time to hoop your item and start embroidering.

    1. Fast Magna Frames on a Brother Six Needle Machine:

    • Machine Used:

      Brother six needle embroidery machine.
    • Hoop Used:

      Fast Magna Frames.
    • Process:

      • Fast Magna Frames are versatile and can be used on various machines.
      • For this method, I'll be using the same monogram font as the previous method.
      • The stabilizer of choice here is the no-show poly mesh. This can be adhered to the back of the sweatshirt using 505 spray.
      • Once the stabilizer is in place, hoop your item, ensuring it's centered.
      • After hooping, it's time to embroider. Make sure to use water-soluble topper for best results.

       

     

     

    1. MaggieFrames on a Melco  Embroidery Machine:

    • Machine Used:

      Melco  embroidery machine.
    • Hoop Used:

      MaggieFrames.
    • Process:

      • The MaggieFrames are magnetic, making them easy to use.
      • For this method, I'll be using a new monogram font with a shadow fill embroidery design.
      • The stabilizer used is the classic cutaway from All Stitch.
      • Once you've hooped your item and it's centered, it's time to embroider. The design used in this method is dense, so ensure your machine settings are adjusted accordingly.

     

    Conclusion:

    Embroidering a sweatshirt can seem daunting, but with the right tools and techniques, it's a breeze. Whether you're using a traditional hoop, fast frames, or MaggieFrame, the key is to ensure your design is centered and your stabilizer is appropriately chosen for the design's density. Happy embroidering!

    Additional Notes:

    • All the links for the products and tools I've mentioned are available in the description below.
    • If you're looking for specific sections of this guide, I've added chapters for easy navigation.
    • Always remember to check the placement guide for accurate measurements, especially when working on different projects.

           

    Dejar un comentario

    Por favor tenga en cuenta que los comentarios deben ser aprobados antes de ser publicados